Adjustments Diagnostic Adjustments - 30
5 Open the Monitors & Sound control panel, and click the
Geometry button.
6 Hold down the option key and click Factory Settings.
7 Go to the next procedure: “Adjusting the Display after
Replacing the CRT/Video Board.”
Adjusting the Display after Replacing the CRT/
Video Board
Caution:
Perform this procedure only after you’ve replaced
the CRT/video board and uploaded the parameter settings.
After replacing the CRT/video board, some adjustment is
necessary. The following steps show the procedure for
• Adjusting screen geometry
• Recalibrating white points
To Next Page
