Basics Repair Issues - 6
New Tripod Stand Safety Tips
Important:
Because this is a new design, keep in mind the
following:
• Lift the display by the hand grips under the left and right
sides of the display. Never lift the display by the tripod
stand.
• Likewise, do not adjust the position of the monitor by
pulling the stand legs. The tripod stand is subject to
cracking or breakage if mishandled.
• When placing the monitor on a table surface, ensure that
all three legs on the tripod stand contact the surface. If
one of the legs is too close to the table edge, the weight of
the monitor could cause the display to fall off the edge.
To Next Page
Loading...
