GB 06
GB 02
GB 07
1.6 Installation Notes
3.1 Group II/III (15 – 36 KG, from approx. 3 to 12 years) with
ISOFIX connectors + 3-point vehicle belt
Never use with a 2-point lap belt
DO NOT modify, or add to the child restraint in any way without approval of a competent
authority, or the manufacturer, as this will void any warranty and may affect safety and
performance.
Always ensure that the child restraint is securely fastened, even when unoccupied, a loose
restraint can cause injuries in the event of a collision.
DO NOT leave your child unattended in the child restraint.
Dry metal parts after any contact with water to prevent the formation of rust.
DO NOT use this child restraint on a passenger seat fitted with a frontal airbag under any
circumstance.
Make sure the product is bought from a decent sales channel. The manufacturer doesn’ t
guarantee the quality of second hand products.
The illustrations in this manual are for reference only, and may differ slightly from your seat
model.
Please always keep this instruction manual for future reference.
•
•
•
•
•
•
•
•
WARNING!
2. Adjust Headrest (Group II/III)
3. Installation
A correctly adjusted Headrest (01) ensures optimal protection for your child in the child car seat:
The Headrest (01) is in the correct position when the Diagonal seat belt (11) of the 3-point vehi-
cle belt sits on the child’ s shoulders and when you can fit 2 fingers between the bottom edge
of the Headrest (01) and the shoulder of the child.
Grip the Headrest Adjustment Handle (07) on the back
of the Headrest (01) and pull it upwards to unlock the
Headrest (01).
Move the unlocked Headrest (01) to the desired height.
As soon as you release the Headrest Adjustment Handle
(07), the Headrest (01) will lock into place by hearing a
“CLICK” sound.
Place the child car seat on the vehicle seat.
Have your child sit down in the child seat and check the
height. Repeat this process until the Headrest (01) is at
the optimal height.
If your car is not equipped with the ISOFIX guide socket,
please insert the guide socket into the ISOFIX anchor.
TIP: ISOFIX anchors are located between the surface
and the backrest of the vehicle seat.
Move the Headrest (01) of the child car seat to the
desired position. (Refer to section 2)
Tips: If the headrest of the vehicle seat gets in the
way, turn it the other way.
1)
2)
3)
4)
1)
2)
CAUTION! The Headrest (01) is in the correct position when you can fit at least 2 fingers
between the bottom edge of the Headrest (01) and the shoulder of the child.
01
02
01
02
To Next Page
Loading...
Need help?
General
