2
IMPORTANT - Missing Components
Please check this product for missing components prior to installation.
For spare parts visit www.aprilproducts.co.uk
IMPORTANT - Installation site
1. Ensure the top surface of the shower tray on which the enclosure will be installed is level in every direction.
2. The tiles or other wall finishing should be effectively sealed at tray edges.
3. Tiles should extend at least to the corner of the tray and a minimum of 1.9 metres from the top of the tray.
FIXING KIT COMPONENTS, SITE CONDITIONS
Screw Cap A × 2
FIXING KIT
Horizontal Profile
End Cap A
× 4
Wall Profile
Top Cover Cap
× 2
Upright Profile
Top Cover Cap
× 2
Wall Plug
8 pcs
Round Head
Tapping Screw
4.0 × 30
16 pcs
Round Head
Tapping Screw
4.0 × 12
8 pcs
Handle × 2
Grip Handle A × 2
Screw Cap × 4
Washer × 8
Countersunk Screw × 4
M4×12
Grip Handle B × 2
Glass Clip
x 4
Top Roller
x4
Bottom Roller
x4
To Next Page
Loading...