To Next PageTo Next Page
Need help?Do you have a question about the APRILIA RX 50 and is the answer not in the manual?
General| Engine Type | Single cylinder, 2-stroke |
|---|---|
| Cooling System | Liquid cooled |
| Fuel System | Carburetor |
| Ignition | CDI |
| Transmission | 6-speed |
| Rear Suspension | Monoshock |
| Fuel Capacity | 7 liters |
| Seat Height | 860 mm |
| Wheelbase | 1, 420 mm |
| Front Brake | Disc |
| Rear Brake | Disc |
| Front Tire | 80/90 - 21 |
| Rear Tire | 110/80-18 |
| Front Suspension | Upside-down fork |
Identifies key controls and indicators on the main dashboard interface.
Details the speedometer, tachometer, and warning lights on the instrument cluster.
Explains key positions for starting and how to lock/unlock the steering wheel.
Describes operation of direction indicators, horn, throttle, clutch, and starter controls.
Details the rear brake pedal, gear pedal, and front brake lever operation.
Covers fuel tank capacity, filling, and how to open the saddle for access.
Information on vehicle keys, identification codes, and chassis/engine numbers.
Essential checks before starting the scooter, including fluids, tires, and lights.
Specifies correct cold tyre inflation pressures for front and rear tires for different models.
Instructions for breaking in the new vehicle to ensure longevity and performance.
Step-by-step guide on how to start the engine, including cold start procedures.
Key safety rules and advice for operating the vehicle responsibly.
Instructions on how to properly stop the engine and park the scooter using the stand.
Recommendations and tips to help prevent the vehicle from being stolen.
Fundamental rules for safe operation, including compliance, practice, and avoiding impairment.
Guidelines on wearing appropriate safety gear, including helmets and protective apparel.
Advice on fitting and using accessories safely without compromising vehicle functions.
Instructions on how to load the vehicle properly to maintain stability and handling.
Procedure for checking and replacing gearbox oil, including recommended types.
Details on checking and adjusting transmission chain tension and lubrication.
Guidance on chain lubrication, tyre inspection, and wear.
Instructions for removing, checking, and replacing the spark plug.
Procedure for cleaning and refitting the air filter sponge using specific oil.
How to check and top up coolant, including replacement intervals and safety warnings.
Procedure for checking brake fluid level, topping up, and safety precautions.
Instructions for checking battery voltage and charging methods.
Advice for storing the vehicle for extended periods to maintain battery and engine condition.
Location and function of the electrical system's fuse, and replacement guidelines.
Details on front light bulbs, indicators, and headlight adjustment.
Procedure for adjusting the front headlight beam alignment according to legal requirements.
Procedure for replacing the rear optical unit and turn signal bulbs.
How to adjust the engine's idle speed for optimal performance, with safety warnings.
Details advantages of disc brakes, pad changes, and maintenance of hoses and joints.
Checks and adjustments for the throttle grip and clutch lever operation.
Troubleshooting guide for difficult starting, including fuel, filters, and carburettor problems.
Diagnosing issues like ignition faults, high fuel consumption, and lack of compression.
Troubleshooting for insufficient braking, faulty suspensions, and engine operational issues.
Overall dimensions of the vehicle, including length, width, height, and wheelbase.
Detailed technical specifications for the 50 6M engine, including bore, capacity, and cooling.
Technical data for the RX 50/SX 50 chassis, suspension, brakes, tires, and fuel tank.
Specifications for oil mixer and fuel tanks, including capacity and dimensions.
Overview of routine maintenance checks and services required at specific mileage intervals.
List of recommended lubricants, fluids, and parts for vehicle maintenance.
