Need help?Do you have a question about the APRILIA SL 750 SHIVER and is the answer not in the manual?
General| Transmission | 6-speed |
|---|---|
| Displacement | 749.9 cc |
| Torque | 81 Nm (60 lb-ft) @ 7000 rpm |
| Seat Height | 810 mm (31.9 inches) |
| Weight | 189 kg (417 lb) |
| Fuel Capacity | 15 L (4.0 US gal) |
| Engine | Liquid-cooled, 4-stroke, 90° V-twin, DOHC, 4 valves per cylinder |
| Front Suspension | 43 mm upside-down fork |
| Rear Suspension | Hydraulic monoshock with adjustable spring preload and rebound damping |
| Front Brakes | Dual 320 mm discs, 4-piston radial calipers |
| Power | 95 hp (70 kW) @ 9000 rpm |
Overview of scheduled maintenance services and intervals.
Actions required at specific intervals like start-up, after run-in, and 1000km.
Procedure for EFI warning light, abnormal engine performance, and diagnostic checks.
Troubleshooting steps for when the engine does not start.
Visual layout of electrical components and the overall wiring diagram.
Location and identification of various relays on the wiring diagram and vehicle.
Diagnosis codes for ECU and instrument panel errors, and error clearing.
Checks for speed, RPM, throttle grip, intake pressure, and temperature sensors.
Detailed instructions for safely removing the engine from the vehicle.
Steps for correctly installing the engine back into the vehicle.
Procedures for disassembling, checking, and assembling the clutch.
Procedures for disassembling, checking, and fitting pistons and cylinders.
Splitting crankcase halves, inspecting components, and installing crankshaft.
Explanation of the Ride by Wire system, throttle control, and parameters.
Steps for draining oil, disassembling, and reassembling fork legs.
Steps for bleeding air from the front and rear hydraulic braking systems.
To Next Page