EasyManua.ls Logo

Aprimatic SC 24 User Manual

Aprimatic SC 24
48 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LBT0499 – DS41627-001 – FW 1.01 2020
SCOPO DEL MANUALE
Questo manuale è stato redatto dal costruttore ed è parte integrante del prodotto.
In esso sono contenute tutte le informazioni necessarie per:
• la corretta sensibilizzazione degli installatori alle problematiche della sicurezza;
• la corretta installazione del dispositivo;
• la conoscenza approfondita del suo funzionamento e dei suoi limiti;
• il corretto uso in condizioni di sicurezza;
La costante osservanza delle indicazioni fornite in questo manuale, garantisce la sicurezza dell’uomo, l’economia
di esercizio e una più lunga durata di funzionamento del prodotto.
Al fine di evitare manovre errate con il rischio di incidenti, è importante leggere attentamente questo manuale,
rispettando scrupolosamente le informazioni fornite.
Le istruzioni, i disegni, le fotografie e la documentazione contenuti nel presente manuale sono di proprietà
APRIMATIC S.p.a. e non possono essere riprodotti in alcun modo, né integralmente, né parzialmente.
Il logo “APRIMATIC” è un marchio registrato di APRIMATIC s.r.l..
PURPOSE OF THE MANUAL
This manual was drawn up by the manufacturer and is an integral part of the product.
It contains all the necessary information:
• to draw the attention of the installers to safety related problems
• to install the device properly
• to understand how it works and its limits
• to use the device under safe conditions
Strict observance of the instructions in this manual guarantees safe conditions as well as efficient operation and
a long life for the product.
To prevent operations that may result in accidents, read this manual and strictly obey the
instructions provided.
Instructions, drawings, photos and literature contained herein are the exclusive property of the
manufacturer and may not be reproduced by any means.
The “Aprimatic” logo is a trademark registered by Aprimatic s.r.l..
BUT DU MANUEL
Ce manuel a été rédigé par le constructeur et fait partie intégrante du produit.
Il contient toutes les informations nécessaires pour :
sensibiliser les installateurs aux problèmes liés à la sécurité ;
installer le dispositif de manière correcte ;
connaître le fonctionnement et les limites du dispositif ;
utiliser correctement le dispositif dans des conditions de sécurité optimales ;
Le respect des indications fournies dans ce manuel garantit la sécurité personnelle, une économie de fonctionnement
et une longue durée de vie du produit.
Afi n d’éviter des opérations incorrectes et de ne pas risquer des accidents sérieux, lire attentivement ce manuel et
respecter scrupuleusement les informations fournies.
Les instructions, les dessins, les photos et la documentation contenus dans ce manuel sont la propriété d’APRIMATIC
S.p.A. et ne peuvent être reproduits sous aucune forme, ni intégralement, ni partiellement.
Le logo « Aprimatic » est une marque déposée par Aprimatic s.r.l..
ZWECK DES HANDBUCHS
Dieses Handbuch wurde vom Hersteller verfasst und ist ein ergänzender Bestandteil des Produkts.
Es enthält alle nötigen Informationen für:
• die Sensibilisierung der Monteure für Fragen der Sicherheit;
• die vorschriftsmäßige Installation der Vorrichtung;
• die umfassende Kenntnis ihrer Funktionsweise und ihrer Grenzen;
• die vorschriftsmäßige und sichere Benutzung.
Die Beachtung der in diesem Handbuch enthaltenen Anweisungen gewährleistet die Sicherheit der Personen, den
wirtschaftlichen Betrieb und eine lange Lebensdauer des Produkts.
Zur Vermeidung von Fehlbedienung und somit Unfallgefahr dieses Handbuch aufmerksam durchlesen und die
Anweisungen genau befolgen.
Die Anleitungen, Zeichnungen, Fotos und Dokumentationen in diesem Handbuch sind Eigentum von APRIMATIC
S.p.A. und dürfen in keiner Weise ganz oder teilweise reproduziert werden.
Das Logo „Aprimatic“ ist ein eingetragenes Warenzeichen der Aprimatic s.r.l
.
OBJETO DEL MANUAL
Este manual ha sido redactado por el constructor y forma parte integrante del producto.
El mismo contiene todas las informaciones necesarias para:
• la correcta sensibilización de los instaladores hacia los problemas de la seguridad
• la correcta instalación del dispositivo
• el conocimiento en profundidad de su funcionamiento y de sus límites
• el correcto uso en condiciones de seguridad
La constante observación de las indicaciones suministradas en este manual, garantiza la seguridad del hombre,
la economía del ejercicio y una mayor duración de funcionamiento del producto.
Con el fi n de evitar maniobras equivocadas con riesgo de accidente, es importante leer atentamente este manual,
respetando escrupulosamente las informaciones suministradas.
Las instrucciones, los dibujos, las fotografías y la documentación que contiene este manual son propiedad de
APRIMATIC S.p.a. y no pueden ser reproducidas en ninguna manera, ni integral ni parcialmente.
El logotipo “Aprimatic” es una marca registrada de Aprimatic s.r.l..
SC 24
Apparecchiatura di controllo per automazione di cancelli scorrevoli a 24 V
Unit for the automatic control of sliding gates 24 V
Platine de commande pour l’automatisation de portails coulissants 24 V
Steuereinheit für Schiebetore 24 V
Equipo de control para la automatización de cancelas correderas 24 V
Istruzioni di installazione elettrica
Uso e Manutenzione
Electrical installation,
Use and Maintenance Instructions
Instructions d’installation éléctrique,
d'Utilisation et d’Entretien
Anleitung für die elektrische Installation,
Gebrauch und Wartung
Instrucciones para la instalación electrica,
el uso y el mantenimiento
Italiano English Français Español Deutch
Question and Answer IconNeed help?

Do you have a question about the Aprimatic SC 24 and is the answer not in the manual?

Aprimatic SC 24 Specifications

General IconGeneral
BrandAprimatic
ModelSC 24
CategoryDoor Opening System
LanguageEnglish

Summary

Manual Introduction and Safety

Purpose of the Manual

Explains the manual's content, user guidance, and manufacturer's scope.

About This Manual

Provides information on the manual's scope and manufacturer's responsibilities.

General Safety Precautions

Essential safety guidelines for installation, environment, and protective measures.

Power Supply Precautions

Guidelines for safe power supply connection and system setup.

System Type Safety

Warnings regarding system compliance, installation conditions, and accessory usage.

System Components and Diagram

System Type Overview

Illustrates the overall system configuration and key components.

Control Unit Description and Terminals

Control Unit Components

Detailed list and description of control unit's internal components and connectors.

M1 Terminal Board Connections

Detailed description of connections for the M1 terminal board.

M2 Connector/Terminal Board

Description of connections for the M2 connector/terminal board.

Configuration and Operation Settings

DIP Switch DSW1 Configuration

Explains the functions and settings configurable via DIP switches.

Trimmer Settings

Details the function and adjustment range of control unit trimmers.

Remote Control Saving Procedure

Step-by-step guide for saving remote controls to the unit.

Remote Control Deleting Procedure

Procedure for deleting saved remote controls from the unit.

Advanced Procedures

Manual Setup Procedure to Position the Gate

Procedure for manually positioning the gate using deadman mode.

Stroke Saving Procedure

Guide on programming the gate's stroke limits for safe operation.

Optional Accessories and Troubleshooting

Optional Cards and Accessories

Details on optional accessories like battery charger and output cards.

Error or Fault Signal Interpretation

Explains the meaning of different LED flash patterns for errors.

Technical Specifications and Connections

Example of Connection Diagram

Visual guide showing how to connect the various system components.

Technical Features

Summary of the control unit's technical specifications and capabilities.

Environmental Compliance and Disposal

WEEE Directive Compliance

Information on compliance with WEEE directive and proper product disposal.

Related product manuals