EasyManua.ls Logo

Aprimatic SWING 230 APRICODE User Manual

Aprimatic SWING 230 APRICODE
64 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SWING 230 APRICODE
cod. LBT0123 - nov.09 - FW 1.07-E
Apparecchiatura di controllo per automazione di cancelli battenti a 230 V
Unit for the automatic control of swing gates 230 V
Platine de commande pour l’automatisation de portails battants 230 V
Steuereinheit für Dreh ügeltore 230 V
Equipo de control para la automatización de cancelas batientes 230 V
Istruzioni di installazione elettrica Uso e
Manutenzione
Electrical installation, Use and Maintenance
instructions
Instructions d’installation éléctrique, d'Utilisation
et d’Entretien
Anleitung für die elektrische Installation,
Gebrauch und Wartung
Instrucciones para la instalación electrica, el
uso y el mantenimiento
BUT DU MANUEL
Ce manuel a été rédigé par le constructeur et fait partie intégrante du produit.
Il contient toutes les informations nécessaires pour :
sensibiliser les installateurs aux problèmes liés à la sécurité ;
installer le dispositif de manière correcte ;
connaître le fonctionnement et les limites du dispositif ;
utiliser correctement le dispositif dans des conditions de sécurité optimales ;
Le respect des indications fournies dans ce manuel garantit la sécurité personnelle, une économie de fonctionnement
et une longue durée de vie du produit.
A n d’éviter des opérations incorrectes et de ne pas risquer des accidents sérieux, lire attentivement ce manuel et
respecter scrupuleusement les informations fournies.
Les instructions, les dessins, les photos et la documentation contenus dans ce manuel sont la propriété d’APRIMATIC
S.p.A. et ne peuvent être reproduits sous aucune forme, ni intégralement, ni partiellement.
Le logo « Aprimatic » est une marque déposée par Aprimatic S.p.A.
OBJETO DEL MANUAL
Este manual ha sido redactado por el constructor y forma parte integrante del producto.
El mismo contiene todas las informaciones necesarias para:
la correcta sensibilización de los instaladores hacia los problemas de la seguridad
la correcta instalación del dispositivo
el conocimiento en profundidad de su funcionamiento y de sus límites
el correcto uso en condiciones de seguridad
La constante observación de las indicaciones suministradas en este manual, garantiza la seguridad del hombre,
la economía del ejercicio y una mayor duración de funcionamiento del producto.
Con el n de evitar maniobras equivocadas con riesgo de accidente, es importante leer atentamente este manual,
respetando escrupulosamente las informaciones suministradas.
Las instrucciones, los dibujos, las fotografías y la documentación que contiene este manual son propiedad de
APRIMATIC S.p.a. y no pueden ser reproducidas en ninguna manera, ni integral ni parcialmente.
El logotipo “Aprimatic” es una marca registrada de Aprimatic S. p. A.
ZWECK DES HANDBUCHS
Dieses Handbuch wurde vom Hersteller verfasst und ist ein ergänzender Bestandteil des Produkts.
Es enthält alle nötigen Informationen für:
die Sensibilisierung der Monteure für Fragen der Sicherheit;
die vorschriftsmäßige Installation der Vorrichtung;
die umfassende Kenntnis ihrer Funktionsweise und ihrer Grenzen;
die vorschriftsmäßige und sichere Benutzung.
Die Beachtung der in diesem Handbuch enthaltenen Anweisungen gewährleistet die Sicherheit der Personen, den
wirtschaftlichen Betrieb und eine lange Lebensdauer des Produkts.
Zur Vermeidung von Fehlbedienung und somit Unfallgefahr dieses Handbuch aufmerksam durchlesen und die
Anweisungen genau befolgen.
Die Anleitungen, Zeichnungen, Fotos und Dokumentationen in diesem Handbuch sind Eigentum von APRIMATIC
S.p.A. und dürfen in keiner Weise ganz oder teilweise reproduziert werden.
Das Logo „Aprimatic“ ist ein eingetragenes Warenzeichen der Aprimatic S. p. A.
PURPOSE OF THE MANUAL
This manual was drawn up by the manufacturer and is an integral part of the product.
It contains all the necessary information:
to draw the attention of the installers to safety related problems
to install the device properly
to understand how it works and its limits
to use the device under safe conditions
Strict observance of the instructions in this manual guarantees safe conditions as well as ef cient operation and
a long life for the product.
To prevent operations that may result in accidents, read this manual and strictly obey the
instructions provided.
Instructions, drawings, photos and literature contained herein are the exclusive property of the
manufacturer and may not be reproduced by any means.
The “Aprimatic” logo is a trademark registered by Aprimatic S.p.A.
SCOPO DEL MANUALE
Questo manuale è stato redatto dal costruttore ed è parte integrante del prodotto.
In esso sono contenute tutte le informazioni necessarie per:
• la corretta sensibilizzazione degli installatori alle problematiche della sicurezza;
• la corretta installazione del dispositivo;
• la conoscenza approfondita del suo funzionamento e dei suoi limiti;
• il corretto uso in condizioni di sicurezza;
La costante osservanza delle indicazioni fornite in questo manuale, garantisce la sicurezza dell’uomo, l’economia
di esercizio e una più lunga durata di funzionamento del prodotto.
Al ne di evitare manovre errate con il rischio di incidenti, è importante leggere attentamente questo manuale,
rispettando scrupolosamente le informazioni fornite.
Le istruzioni, i disegni, le fotogra e e la documentazione contenuti nel presente manuale sono di proprietà
APRIMATIC S.p.a. e non possono essere riprodotti in alcun modo, né integralmente, né parzialmente.
Il logo “APRIMATIC” è un marchio registrato di APRIMATIC S.p.a.
Italiano
EnglishFrançaisDeutschEspañol

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Aprimatic SWING 230 APRICODE and is the answer not in the manual?

Aprimatic SWING 230 APRICODE Specifications

General IconGeneral
BrandAprimatic
ModelSWING 230 APRICODE
CategoryControl Unit
LanguageEnglish

Summary

General Safety Precautions

Product Description

Details the features, permitted use, and technical specifications of the SWING 230 control unit.

Installation

Covers the assembly, electrical setup, connections, and power supply connection for the unit.

System Start-up

Guides through preliminary checks, self-teach movements, default functioning, and remote control saving.

Functioning

Explains operating logic, inputs/outputs, and display testing for the control unit.

Programming

Details the process for programming the control unit's parameters and settings.

Notes for Maintenance Technicians

Provides guidance for maintenance personnel regarding compliance and routine procedures.

Information for the User

Contains essential information and warnings for the end-user regarding product use and maintenance.

Product Description

Permitted Use and Field of Application

Defines the allowed uses and operational scope for the SWING 230 control unit.

Technical Features

Details the electronic and microprocessor capabilities of the SWING 230 unit.

Technical Specifications

Provides a table of technical data including power supply, frequency, and fuses.

Installation

Assembling and Replacing the Unit

Instructions for installing or substituting the control unit within the electric box.

Electric System Set-up

Preparation of electrical connections for control and safety devices.

Electrical Connections

Guidance on checking and connecting cables as per layout diagrams.

Connecting to Mains Power Supply

Instructions for safely connecting the unit to the 230V AC mains power.

System Start-up

Preliminary Checks and Parameters

Checks for inputs, movement direction, and operator parameters during system start-up.

Self-Teach Movements

Procedure for the unit to learn slowing points and movement strokes.

Default Functioning

Describes the default operating mode (AUTOMATIC) and factory settings.

Enabling Self-Teach

Steps to re-enable self-teaching after modifications or reset.

Saving Remote Controls

Instructions for programming remote controls into the system.

Functioning

Operating Logic

Details the different operating modes and their logic sequences.

Inputs and Outputs

Description of the unit's input signals and output functions.

Testing on Display

How to read and interpret the unit's display for status and testing.

Programming

Notes for Maintenance Technicians

Routine Maintenance

Recommended schedule and operations for routine maintenance of the electrical equipment.

Information for the User

Related product manuals