Aqara Curtain Driver E1 - Page 13

09
B) Then click the setting button 3 times in succession quickly to set the
first limit point of the range. The first limit point is set successfully aer
the long "beep".
C) Meanwhile, the Curtain Driver will automatically run to the opening
limited point and stop aer being pulled in the fully opening direction
for about 10cm. Aer the long "beep", another limit point is automatical-
ly and successfully set, which means the opening range of the device is
set up.
about 10cm
At this time, the curtain driver
starts to run automatically
Another stroke limit point (curtain at the
"completely open" position)
First stroke limit point (curtain at the
"completely closed" position)