Need help?Do you have a question about the Aqara H1 and is the answer not in the manual?
Place the device directly on a surface without adhesive.
Remove protective film and attach the device to the desired surface.
Drill a hole in the back cover and fix with a screw to the wall box.
Place the device directly on a surface without adhesive.
Remove protective film and attach the device to the desired surface.
Drill a hole in the back cover and fix with a screw to the wall box.
General| Model | WS-EUK01 |
|---|---|
| Wireless Protocol | Zigbee 3.0 |
| Input | 100-250V AC, 50/60Hz |
| Operating Humidity | 0% - 95% RH, non-condensing |
| Compatibility | Apple HomeKit, Google Assistant, Amazon Alexa |
| Certification | CE, RoHS |
To Next Page
