Need help?Do you have a question about the Aqara Wireless Remote Switch H1 and is the answer not in the manual?
Test communication range by pressing the switch 5 times after binding.
Place the device directly on a surface without adhesive.
General| Connectivity | Wireless |
|---|---|
| Wireless Protocol | Zigbee |
| Protocol | Zigbee 3.0 |
| Frequency | 2.4 GHz |
| Power Supply | Battery |
| Operating Voltage | 3V |
| Battery Type | CR2032 |
| Battery Life | Up to 2 years |
| Aqara Hub Required | Yes |
| Battery | CR2032 |
| Operating Temperature | -10°C to 50°C |
| Operating Humidity | 0% to 95% RH |
| Compatibility | Aqara Hub |
To Next Page
