Aqua Comfort ACT-1250HC User Manual

844.770.HEAT • www.AquaComfort.com
XL Series Heat Pump Pool Heater
INSTALLATION MANUAL

Aqua Comfort ACT-1250HC Specifications

General

Model	ACT-1250HC
Power Supply	220V/60Hz/1-Phase
Operating Pressure	50 PSI
Weight	25 kg
Temperature Range	20-40°C

Summary

Inspection and Safety

Safety Considerations and Precautions

Details essential safety guidelines, warnings, and precautions for proper equipment use.

Installation Location and Clearances

Mounting Pad and Anchoring Requirements

Details requirements for the installation pad and securing the heat pump unit.

Optimal Performance Clearances

Water Flow and Plumbing Connections

Plumbing Requirements and Flow Rates

Electrical Connections and Wiring

Main Power Supply Wiring

Details the steps for connecting the main power supply to the heat pump.

Wiring Diagram Overview

Connecting to Automated Systems

Remote Control and System Integration

Start-Up Procedures and Modes

Electronic Control Panel Overview

Menu Navigation and Options

Factory Select Menu Settings

Mode of Operation Explained

Unit and Spa Mode Operation

Internal Protection Analyzers and Codes

Error Codes and Sensor Readings

Maintenance and Winterizing

Heat Pump Protection and Winterizing

Covers protecting the heat pump and the critical steps for proper winterization.

Troubleshooting Checklist

Common Issues and Condensation Checks

Addresses common problems and provides methods to identify condensation versus leaks.

Analyzer Codes Explained

Error Codes and Indicators

Requesting Service Information

Service Request Process and Information

Outlines the procedure for requesting service and the information needed for a request.