Need help?Do you have a question about the Aqua Comfort ACT-1750HC and is the answer not in the manual?
General| Model | ACT-1750HC |
|---|---|
| Category | Swimming Pool Heater |
| Efficiency | 82% |
| Maximum Working Pressure | 50 PSI |
| Ignition Type | Electronic |
| Heating Capacity | 175, 000 BTU/h |
| Fuel Type | Natural Gas/LPG |
| Water Connections | 2 inch |
Step-by-step guide for connecting the main power supply to the heat pump's electrical enclosure.
How to connect remote thermostats or control systems for heat-only models.
Instructions for integrating HeatCOOL models with automated systems, including setting modes and temperatures.
Explains the operation modes and display indicators for Heat Only units.
Explains the operation modes and display indicators for AquaCool units.
Explains the operation modes and display indicators for Heat/Cool units.
How to operate the unit in SPA mode and set desired spa temperature.
Explains the "HPS" or "HP3" error code for low water flow and its causes.
Explains the "FLO" error code for no water flow and its causes.
Essential maintenance tips to protect the heat pump, including filter cleaning and airflow.
Procedures for winterizing the heat pump to prevent freeze damage.
To Next Page
