Need help?Do you have a question about the Aqua Flo Flo-Master HP Series and is the answer not in the manual?
Ensure all basic safety precautions are followed when installing and using electrical equipment.
Prevent injury by ensuring children are closely supervised when using the product.
Pump is for permanently installed pools; not for storable pools.
Motor must be bonded with solid copper conductor per National Electric Code.
Ensure pump casing is filled with water before starting; allow priming time.
Check circuit breaker, wiring, power supply, and switch settings.
Check wiring, voltage supply, and ensure motor has fresh air supply.
Verify pump level, plumbing, air release, clear lines, and check for air leaks.
General| Series | HP Series |
|---|---|
| Max Flow Rate | Varies by model |
| Max Head | Varies by model |
| Horsepower | Varies by model |
| Phase | Single Phase |
| Inlet/Outlet Size | 1 1/2" NPT |
| Material | Cast Iron |
To Next Page
