Installation 103/104F
The larger models have two sponges for additional
ltration but still in most cases these models should
only be used as a secondary lter to help with existing
ltration or as extra water ow in the aquarium.
They are fully assembled and ready to use.
1. Decide on which outlet option to use.
a) If no attachment is required simply push the direct
outlet into pump outlet.
b) If the venturi is required, push venturi outlet directly
into pump outlet, hang airline outside your aquarium.
2. Suction cups will fasten the lter to the wall of you
aquarium. It is best to have surface agitation if it is
being used as the sole lter.
3. Use ow adjuster on the front of the lter:
+ will allow full ow
- will reduce the ow
Remember the more ow the better.
Fig 2
Fig 5
Fig 3
Fig 1
Fig 4
To Next Page
Loading...
