To Next PageTo Next Page
Need help?Do you have a question about the Aqua PRO PRO1300h/c and is the answer not in the manual?
This manual contains important information for safety and preventing equipment problems.
Inspect your unit very carefully before installing. Check for any damage to the unit.
Locate the pool heater for best performance, maintaining clearances from obstructions.
Details on connecting the unit to the pool's plumbing system, including freezing weather precautions.
All wiring and electrical connections must be performed by a qualified electrician.
Explanation of the control panel buttons for mode selection and temperature adjustment.
Details on setting the desired pool or spa water temperature, including calibration.
Instructions on how to connect the pool heater to remote control systems.
Information on activating a feature to prevent unauthorized adjustment of high temperature settings.
Overview of the manual temperature control designed to regulate pool and spa water temperature.
Explanation of the two indicator lights on the front panel displaying unit status.
Details on setting the desired water temperature using the thermostat knob.
How to switch between heating and cooling modes on the unit.
Explanation of the unit's automatic defrost cycle for operation in cooler temperatures.
Details on using the TCE feature to manage pump and filter system run time.
Instructions on using an existing time clock with the heat pump for operation.
Guide to setting the system run time for TCO operation, typically 2 hours.
How to switch between heating and cooling modes on the unit.
Explanation of the unit's automatic defrost cycle for operation in cooler temperatures.
Choosing between Time Clock Override (TCO) or Time Clock Eliminator (TCE) functionality.
Information on how the Time Clock Eliminator feature manages pump and filter run time.
Guide to setting the system run time for TCE operation, selecting daily hours for pump/filter.
Annual maintenance is required to maintain full life of the heater and warranty.
Information about typical condensation from heat pumps and how to check for leaks.
Benefits of using a pool blanket to reduce heat loss and improve heating efficiency.
Procedures for shutting down and starting up the unit at the beginning/end of the season.
How weather conditions affect heater operation and performance.
Explanation of diagnostic codes displayed by the heat pump for troubleshooting.
Checks to perform if the unit is not operating, including breaker and flow issues.
Troubleshooting steps when the unit runs but does not heat the water.
Steps to take if the unit is unable to cool the pool water.
Diagnosing why the unit may be running continuously without reaching the desired temperature.
Troubleshooting intermittent cycling of the unit, potentially due to frost or refrigerant issues.
General| Brand | Aqua PRO |
|---|---|
| Model | PRO1300h/c |
| Category | Swimming Pool Heater |
| Language | English |
