To Next PageTo Next Page
Need help?Do you have a question about the Aqua PRO PRO1100e and is the answer not in the manual?
Crucial information for safe operation and preventing equipment issues.
Critical warnings on drowning, medical advice, and hyperthermia effects.
Inspect unit for damage before installation.
Guidelines for optimal heat pump placement.
Connecting the unit to the pool's plumbing system.
Requirements and safety for unit wiring.
Explanation of buttons, temperature set points, and remote connectivity.
Prevents unauthorized high-temp adjustments.
PRO1100 control panel, indicator lights, and temperature setting.
Electrical schematic for the PRO1100 model.
Electrical schematic for PRO1100e and PRO1300.
Electrical schematic for the PRO1300h/c model.
Managing heating/cooling modes and defrost cycle for PRO1300h/c.
How the TCE divides pump run time over 6 periods.
Using an existing time clock with the heat pump.
Required maintenance to ensure full heater life and warranty.
Understanding and checking for typical condensation.
Benefits of using pool blankets for heat retention.
Procedures for shutting down the unit at the end of the season.
Steps for starting up the unit at the beginning of the season.
Impact of weather on heater operation.
Explanation of diagnostic codes and their causes.
Checks for when the unit is not operating.
Troubleshooting steps when the unit runs but does not heat.
Troubleshooting for units that do not cool.
Diagnosing why the unit may be running non-stop.
Troubleshooting intermittent cycling issues.
General| Brand | Aqua PRO |
|---|---|
| Model | PRO1100e |
| Category | Swimming Pool Heater |
| Language | English |
