To Next Page
J
Jeffrey CrossAug 11, 2025
What to do if my Aqua Pulse Spas Hot Tub has no power and the RCD keeps tripping?
- KKathleen CollinsAug 11, 2025
If your Aqua Pulse Spas Hot Tub has no power, no circulation, and the RCD repeatedly trips, here are some things to check: * Check the MCB switch. * Consult an electrician to check the wiring. * Replace the fuse in the control box if it's blown. * Reset the RCD. * Consult an electrician to check if the RCD is connected properly. * Access and clean the impeller if it's clogged. * Top up the water if the water level is too low. * Check the power supply and consult your electrician to ensure it's adequate and there are no shorts in the grounding.
General
