Need help?Do you have a question about the Aqua Pulse Spas regency designer and is the answer not in the manual?
General| Brand | Aqua Pulse Spas |
|---|---|
| Model | regency designer |
| Category | Hot Tub |
| Language | English |
General safety warnings for spa use, including supervision, entry/exit, suction guards, and chemical safety.
Reasons why outdoor locations are popular and temperature considerations for different seasons.
Advice on checking local council bylaws, digging, privacy, and ensuring access to equipment.
Emphasizes the need for a licensed electrician and proper RCD installation for all electrical connections.
Information displayed on the Main Screen, including temperature, time, and alerts.
Overview of the Spa Screen which displays icons for controlling spa equipment like pumps and lights.
Explanation of Save/Cancel buttons and Back/Exit buttons used in the interface.
Explanation of two temperature range settings, High (80-104°F) and Low (50-99°F).
How the spa heats in Ready Mode (regular polling) versus Rest Mode (during filter cycles).
Describes the 'Ready in Rest Mode' display and how to switch between pump speeds.
Instructions for filling the spa to the correct level, opening valves, and preparing for power-up.
How the control enters Priming Mode and the heater is disabled during this phase.
Step-by-step process for priming the spa pumps to ensure proper circulation.
How to manually or automatically exit Priming Mode and what happens next.
How pumps operate, including non-circ systems and circulation pump modes.
How filtration and ozone generation work, including filter cycles and purge cycles.
How the spa protects itself from freezing temperatures by activating water devices.
Details on the optional clean-up cycle that runs after a pump or blower is used.
Importance of setting the Time-of-Day for filtration and other features, and how to set it.
How to set filter cycles using start time and duration, with 15-minute increments.
How to enable and adjust the optional second filter cycle.
Information on programmable circulation pump modes for filtration cycle duration.
How purge cycles maintain sanitary conditions and protect against freezing.
How to enable and adjust the Light Timer feature if available.
How to flip the display and buttons for easier operation from inside or outside the tub.
How auxiliary panels activate specific devices and function like Spa Screen buttons.
How to lock settings to prevent unauthorized temperature adjustments.
How to lock the entire panel to prevent controller use, while automatic functions remain active.
Requirements for smart device, internet connection, and downloading the app.
Instructions for downloading the Balboa Water Group app from Google Play or App Store.
Steps after downloading the app, including checking for the icon.
How to save current equipment combinations as scenes by holding a scene number.
How to activate a stored scene by pressing the scene number.
How to change the temperature display between Fahrenheit and Celsius.
How to switch the clock display between 12-hour and 24-hour format.
How to turn reminder messages like 'Clean Filter' On or Off.
How to set the duration for the clean-up cycle after use.
How to set the address for RF Dolphin models.
How to cycle through background colors available on the control panel.
How to change the displayed language on the panel.
Displays system settings like Software ID, Model, Setup Number, and Heater details.
Emphasizes the importance of testing GFCI/RCD regularly for safety.
Warns against user-serviceable parts and advises contacting dealers for assistance.
Cautions regarding GFCI testing, manual reading, drainage, enclosure rating, and parts replacement.
To Next Page
