Why is my Aqua To Go Water Dispenser not cold enough?
If your Aqua To Go Water Dispenser isn't cooling enough, it might not have enough space around it, or the room might be too hot or humid. Try moving it to a cooler location. Also, if you've dispensed a lot of water recently, give the cooling system time to catch up.
What to do if my Aqua To Go Water Dispenser doesn't operate?
If your Aqua To Go Water Dispenser isn't working, make sure it's plugged in and the power switch is on. Also, check the power switch at the back of the cooler. Try another power point and check the circuit breaker, replacing any blown fuses.
What to do if my Aqua To Go Fresco is leaking from the bottom?
If your Aqua To Go Water Dispenser is leaking from the bottom, check the drain plugs underneath to make sure they're secure. Also, the bottle may have a small pin hole leak, so try replacing it with a new one.
How to fix a leak from the taps on my Aqua To Go Fresco?
If your Aqua To Go Water Dispenser is leaking from the taps, try tightening the leaking tap slightly by turning it clockwise. If that doesn't work, a replacement tap will be supplied.
How to use the child safety red hot tap on Aqua To Go Fresco Water Dispenser?
To use the child safety red hot tap on your Aqua To Go Water Dispenser, let a new bottle sit for 30 minutes. Slide the red lever to the right, and while holding it there, push the hot tap down. It may take 2 minutes for water to flow initially. Make sure there's a water bottle on top or that the water tank is nearly full, otherwise the tap will not work. Be careful, as the water from the hot tap is very hot.
Why doesn't water flow from the tap of my Aqua To Go Fresco?
If water isn't flowing from your Aqua To Go Water Dispenser, let the cooler sit with a bottle on top for an hour. It can take up to 2 minutes for the first cup to flow. If there may be an air blockage: a) Lift the bottle up and let air into the bottle. b) Slowly rock the bottle and water cooler from side to side. Ensure there's enough water in the tank or bottle, and that the water intake isn't blocked. Also, check for any kinks in the water tube. If problems persist, contact Aqua To Go service center.
Why does my Aqua To Go Fresco water have a bad taste?
Your Aqua To Go cooler has been pre-cleaned, but if you experience a bad taste: 1. Turn off the power. 2. Empty the unit from the drain plugs underneath, being careful when opening the hot water drain plug. 3. Flush 2 liters of clean tap water through the system. 4. Put the plugs back in place securely. 5. Fill the tank with hot water and two tablespoons of bi-carb soda and leave overnight. 6. The next day, repeat steps 2 to 4. Ensure you dispense a cup of water from the hot tap before turning the rear power switches back on.
Why isn't the hot water hot enough in my Aqua To Go Fresco Water Dispenser?
Check that the heating switch on the rear of your Aqua To Go cooler is turned ON.
Carefully remove all packaging and place all parts in a safe location.
Check for all required parts and contact the Service Centre if any are missing or the cooler is not working.
Register your product warranty online within 48 hours of purchase.
Dispense hot water from the red safety tap before plugging in and turning on switches.
Non-refrigerated cabinet ideal for storing tea, coffee, sugar, and cups.
Guidelines for placing the water cooler in a suitable, safe, and well-ventilated area.
Flush the water cooler's tank and lines with fresh water before first use.
Instructions for gently lowering the water bottle onto the intake spike.
Information on achieving optimal hot and cold water temperatures and tap operation.
Labels identifying the various parts of the water cooler unit.
Schematic representation of the water cooler's electrical connections and components.
Technical details including model, voltage, cooler size, and shipping weight.
Details on electrical safety and electromagnetic interference testing.
Instructions for inspecting the cooler upon delivery and contacting customer service.
Guidance on registering the product warranty online for monthly prize draws.
Detailed instructions on how to operate the child safety hot water tap.
Description of the non-refrigerated storage cabinet's purpose and suitability.
Essential safety precautions to prevent fire, electrical shock, or injury.
Guidelines for selecting an appropriate area for the water cooler's placement.
Acknowledging the risk of water damage and slip hazards from leaks or spills.
Instructions on how to safely lift and carry the water cooler without damage.
Warning not to operate the cooler without water in the tank.
Steps for securely attaching the water cooler to a wall for added stability.
Illustrations showing the process of fixing the cooler to a wall.
Step-by-step guide for installing a new water bottle onto the cooler.
How to operate and manage the hot water function, including switch usage.
How to operate the cooling system and understand the indicator light.
Information on optimal operating temperatures and factors affecting water temperature.
Instructions for plugging the appliance into a grounded wall outlet.
General cleaning advice and specific steps for cleaning the tank and taps.
Instructions for unplugging, draining, and storing the water cooler when not in use.
Troubleshooting steps for no water flow, including air blockage and blockages.
Causes and solutions for insufficient cooling, including placement and room temperature.
Checks for the heating switch and potential causes for insufficient hot water.
Identifying and refitting loose drain plugs as a cause for leaks.
Troubleshooting loose taps and the possibility of needing replacement parts.
Steps to address bad taste, including pre-rinse and cleaning with baking soda.
Instructions for operating the child safety hot tap and ensuring water flow.
Checks for power supply issues, switches, and potential circuit breaker or fuse problems.
Reminder to register your water cooler warranty online for prize draws.
Details of warranty limitations, exclusions, and applicable locations.
Conditions under which the Limited Warranty is valid, including proper installation and use.
Specifies the warranty period as 1 year for material defects, excluding taps.
Owner's responsibilities for minor adjustments and returning the cooler for warranty claims.
Instructions to contact the Service Centre before returning the product.
Contact information for customer service and support inquiries.
General| Hot Water | Yes |
|---|---|
| Cold Water | Yes |
| Type | Countertop |
| Water temperature | Hot, Cold, Room Temperature |
| Material | Plastic |
| Dispensing Method | Push-button |
To Next Page
