7
Fig.1
2. Please ensure the size for technical compartment pit is : 960×530×420mm (Fig.2)
3. Please make sure there is drainage pipe for the technical compartment water
outgoing. (Fig.2) if there is no connector inside of the unit; please open a suitable hole
yourself. But please make sure the location is well connected with the drainage pipe.
Fig 2
4. Please take care of the wire in the electrical conduit pipe to connect the technical
compartment is 4*2.5m
2
;If possible, please make the wire inside of a protective
sheath.
5. Please leave the handrail 2 round holes for installation accordingly.(Fig. 3)
To Next Page
