To Next PageTo Next Page
Need help?Do you have a question about the Aqua TEC and is the answer not in the manual?
Details power supply, absorbed power, suction height, and capacity.
Recommends reading labels, checking tube compatibility, voltage, and pressure.
Steps for fixing the pump to the wall using an adhesive label and bracket.
Covers power connection, safety precautions, and earth system verification.
Instructions for suction/delivery tubes, tank inlet, and injection valve assembly.
How to use the potentiometer to adjust pump speed from 10% to 100%.
Explains LED states (priming, regular operation, block, stand-by) and flashing frequency.
Details the three switch positions: ON, OFF (stand-by), and MOM (priming).
Describes signals for low product level (buzzer, red LED) and how to resolve.
Explains motor block detection (attempts, buzzer, red LED) and stopping procedure.
Details the alarm triggered if the switch is left in the OFF position for 10 minutes.
Regular checks for tank level, foot strainer, tube integrity, and pump operation.
Lists the components provided in the kit for detergents and sparkling aid.
Information on the proper disposal of electrical and electronic devices.
General| Brand | Aqua |
|---|---|
| Model | TEC |
| Category | Water Pump |
| Language | English |
