To Next PageTo Next Page
Need help?Do you have a question about the Aqua HC151 PH-RX and is the answer not in the manual?
Provides technical specifications including power supply, fuse, protection level, weight, and dimensions.
Details hydraulic performance: max flow rate, pressure, strokes per minute, volume per stroke.
Lists the items included in the product package: pump, manuals, and accessories.
Specifies electrical characteristics: voltage, frequency, and fuse type.
Describes the pump's operating modes: Constant Flow Rate, Proportional PH, and Proportional RX.
Details additional features: Level Alarm, Flow Alarm, Injection Alarm, OFA Alarm, Relay Setting, Inhibit, Language.
Explains the user interface components: LCD, LEDs, and control keys.
Details the internal terminal block for connecting various signals and components.
Describes the pump's external connector box and pin assignments.
Allows putting the pump into standby mode by holding Down and Enter keys.
Enables performing the priming operation for 5 minutes via Up and Enter keys.
Allows selection of the pump's display language from a list of options.
Enables calibration of the pump's flow rate by setting strokes and volume.
Sets the time delay in minutes for recognizing a filter alarm.
Configures level alarm settings: contact type (NO/NC) and priming behavior.
Configures flow alarm settings, enabling or disabling the alarm.
Configures pulses alarm: setting reference pulses and max difference.
Configures OFA alarm settings, defining time for alarm activation.
Configures range alarm settings for PH and RX values.
Sets the inhibit function to enable or disable specific pump operations.
Sets the relay's working mode to Dosing Rep. or Alarm.
Allows calibration of the pH or Redox probe.
Guides pH probe calibration: zero calibration and gain calibration.
Guides Redox probe calibration: zero calibration and gain calibration.
Allows changing the password to access the ADMIN menu.
Restores the pump to its factory default parameters.
Sets the pump to operate at a constant frequency for dosing.
Configures the pump to dose proportionally to pH input signal.
Configures the pump to dose proportionally to Redox input signal.
Allows user modification of constant frequency settings.
Allows user modification of PH mode parameters like setpoint and frequency.
Allows user modification of RX mode parameters like setpoint and frequency.
Displays information when a level alarm is active, showing alarm time.
Reports events when a limit temperature is reached, stopping dosing.
Displays total reagent dosed in ml and allows reset.
General| Brand | Aqua |
|---|---|
| Model | HC151 PH-RX |
| Category | Water Pump |
| Language | English |
