Aqua HC151 PH-RX - Setup - Restore Par. Default

HC151 PHRX
Digital multifunction solenoid metering pump ENGLISH
ADSP9500092 14/04/2015 Rev. 1.0 44/123
4.1.9 SETUP – RESTORE PAR. DEFAULT
The RESTORE PAR. DEFAULT allows to set factory parameters of pump. The menu consists:
RESTORE PAR.
DEFAULT
ENTER
ARE YOU SURE?
YES/NO
ENTER
Use the Up and Down keys to set
yes or no the factory parameters.
Yes =press and hold the Enter key to
restore default parameters