Aqua HC151 PH-RX - Working Mode; Working Mode - Constant Frequency

HC151 PHRX
Digital multifunction solenoid metering pump ENGLISH
ADSP9500092 14/04/2015 Rev. 1.0 45/123
4.2 WORKING MODE
The working mode allows you to set the working mode the pump will operate in.
Press and hold the ESC key to return to the previous menu.
4.2.1 WORKING MODE – CONSTANT FREQUENCY
The pump doses with constant frequency.
Press and hold the ESC key at any point in the menu to return to working mode menu (see
4.2)
WORKING
MODE
ENTER
MODE
CONSTANT /
PH /
RX /
CONSTANT
ENTER
CONST. FREQ
<N>%
ENABLE USER
YES/NO
ENTER
MODO FUNC
SAVE? YES/NO
ENTER
ENTER
Use the Up and Down keys to select the desired
working mode and press the ENTER key to confirm
your choice.
Use the Up and Down keys to set N value.
Use the Up and Down keys to enable the user to modify
the working mode setttings.
Use the Up and Down keys to save this working
mode.
YES –press & hold the ENTER key to program
pump.
NO - press & hold the ENTER key to return to the
working mode menu