Need help?Do you have a question about the Aquabot turboT and is the answer not in the manual?
General| Brand | Aquabot |
|---|---|
| Model | turboT |
| Category | Swimming Pool Vacuum |
| Language | English |
Details the components and function of the floating cable system for the pool cleaner.
Details the components and function of the bottom lid assembly of the pool cleaner.
Details the components and function of the pool cleaner's power supply unit.
Details how to properly lock the floating handle for optimal pool cleaner operation.
Instructions for connecting the power supply to a GFCI outlet and placing it correctly near the pool.
Steps to properly place the cleaner in the pool to release air and start its operation.
How to set the digital timer for continuous run, internal timed operation, or external timed operation modes.
Explanation of continuous run mode and how to activate it on the digital timer.
How to customize the cleaner's automatic operating cycle using internal or external timers.
How to adjust the debris intake port size for different types of debris.
Explanation of how to use extensions to adjust suction depth for different pool surfaces.
Information about rollers and the power wash system for improved cleaning.
Explains how the cable float and remote control influence the cleaner's movement and cleaning pattern.
Details the cleaner's movement pattern and the role of the cable float in directional guidance.
Step-by-step guide on how to clean, maintain, and replace the pool cleaner's filter bag.
Instructions for adjusting flotation and inspecting the propeller for optimal operation.
Tips for maintaining the floating cable and caring for scrubbing brushes.
Instructions on how to change drive tracks and drive belts for proper cleaner function.
Guidelines for properly storing the pool cleaner, cable, and power supply when not in use.
Instructions on how to safely package the cleaner for shipping to a repair facility.
Troubleshooting steps for a cleaner that pumps water but doesn't move or moves slowly.
Troubleshooting steps for a cleaner that moves but doesn't pick up dirt or pump water.
Troubleshooting steps for floating cable tangles, cleaner orientation, and debris escape.
Detailed troubleshooting for cleaner movement, pumping, and debris collection problems.
Detailed troubleshooting for floating cable issues, flotation, and falling off walls.
Troubleshooting for air removal, filter bag, power supply, and operational noises.
Troubleshooting for incomplete cleaning, getting stuck, and other operational issues.
Troubleshooting steps for power supply issues, buoyancy, and operational noises.
To Next Page
