Need help?Do you have a question about the Aquabot XTREME and is the answer not in the manual?
General| Type | Robotic |
|---|---|
| Pool Type | In-Ground |
| Cable Length | 60 ft |
| Weight | 18 lbs |
| Pool Size | Up to 50 ft |
| Warranty | 2 years |
Details the components and features of the floating cable system, including the cable and float.
Describes the components of the bottom lid assembly, including the filter bag support and debris intake.
Outlines the features of the power supply unit, including its handle, switch, and cable socket.
Explains how to position the power supply unit at least 12 feet from the pool edge for safety and optimal operation.
Instructs on how to properly submerge and place the cleaner on the pool floor for correct operation and cleaning.
Details the sequence of movements and turns the cleaner performs to cover the pool floor and walls.
Provides instructions on how to clean and maintain the filter bag for optimal suction and filtration.
Explains how to adjust the cleaner's buoyancy using provided flotation devices for proper operation.
Details how to inspect and clean the propeller to ensure efficient water flow and prevent obstructions.
Guides on inspecting and maintaining the floating cable to prevent damage and ensure proper reach.
Instructs on checking for wear and replacing scrubbing brushes to maintain traction and cleaning ability.
Provides step-by-step instructions for removing and replacing worn drive tracks on the cleaner.
Details the process for replacing drive belts to ensure proper movement and climbing ability.
Illustrates the drive belt assembly and provides notes on proper re-assembly for optimal function.
Offers guidance on storing the cleaner properly to prevent damage from environmental factors.
Outlines the steps for packaging the cleaner securely for transport, especially for repairs.
Addresses issues where the cleaner operates but has limited or no movement.
Solves problems related to the cleaner moving but failing to collect dirt and debris.
Provides solutions for the cleaner flipping or falling backward when climbing pool walls.
Explains how to prevent debris from escaping when taking the cleaner out of the pool.
Covers issues where the cleaner has no power or fails to operate at all.
Helps diagnose and fix problems where the cleaner misses parts of the pool.
Offers solutions for the cleaner getting stuck on various pool obstacles.
Addresses power supply issues where it shuts off prematurely during operation.
Solves problems related to the cleaner not sinking properly or floating away from the wall.
Detailed steps for diagnosing and resolving issues with slow or no cleaner movement.
In-depth solutions for when the cleaner moves but fails to collect debris effectively.
Detailed guide to fixing the issue of the cleaner falling backward on walls or stairs.
Detailed steps to ensure the bottom lid closes properly and prevents debris from escaping.
Thorough troubleshooting for power and movement failures, including electrical checks.
Comprehensive guide to diagnosing why the cleaner misses areas of the pool and how to correct it.
Detailed advice on preventing the cleaner from getting stuck on various pool obstacles.
In-depth troubleshooting for power supply interruptions during a cleaning cycle.
Detailed solutions for issues related to the cleaner's buoyancy and stability in the water.
To Next Page
