Need help?Do you have a question about the Aquabot RAPIDS 4WD and is the answer not in the manual?
Instructions on connecting the power supply to a GFCI outlet and the cleaner.
How to set the cleaner's timer and adjust for pool size for optimal operation.
Guidance on adjusting the cleaner's suction ports for different debris levels.
Steps for correctly re-installing cleaned filter baskets into the pool cleaner.
Information on the rotating brush and instructions for its removal and maintenance.
Important safety warnings to observe before operating or troubleshooting the pool cleaner.
Solutions for common problems like slow movement, suction loss, or stuck units.
General| Type | Robotic Pool Cleaner |
|---|---|
| Drive System | 4-Wheel Drive |
| Filter Type | Cartridge Filter |
| Weight | 19.5 lbs |
| Cable Length | 60 feet |
| Pool Type | In-Ground |
| Cleaning Coverage | Floor, Walls, and Waterline |
| Pool Size | Up to 50 feet |
| Power Supply | 110V |
| Cleaning Cycle Time | 1.5 / 2 / 2.5 hours |
| Cleaning Time | 2.5 hours |
To Next Page
