How to fix insufficient water flow in Aquacal Chiller?
To address insufficient water flow in your Aquacal Chiller, first, ensure the water pump is on and the water valves are correctly positioned to allow water flow. If the problem continues, verify that the filtration system is clean and backwash it if necessary. If the error still persists, it could be a water pressure switch issue, and you should request service.
What to do if my Aquacal TropiCool TC500 shows high pressure?
To troubleshoot a high pressure issue with your Aquacal Chiller, first make sure that the fan is working and that there are no obstructions blocking airflow through the equipment. If the problem persists, it may be a refrigerant issue, and you should request service.
How to troubleshoot low pressure on Aquacal TropiCool TC500?
To address low pressure in your Aquacal Chiller, first, check that the water pump is on and the water valves are in the correct positions to allow water to flow through the chiller. If the issue remains, ensure the filtration system is clean and backwash it if needed. If the error continues, it might be a refrigerant problem, and you should request service.
General| Model | TropiCool TC500 |
|---|---|
| Category | Chiller |
| Refrigerant | R-410A |
| Compressor Type | Scroll |
| Phase | 1 |
| Minimum Flow Rate | 20 GPM |
| Power Supply | 208-230V |
| Water Flow Rate | 20 GPM |
To Next Page
