To Next PageTo Next Page
Need help?Do you have a question about the Aquacal TropiCool and is the answer not in the manual?
Procedure to activate the chiller from sleep mode and illuminate the display.
Details on the chiller's display interface, including buttons and indicator lights.
Instructions for switching the chiller between cooling mode and off states.
Steps for adjusting the desired water temperature setpoint for the pool or spa.
Overview of initial configuration options for the chiller's settings.
Guide to changing the temperature display units between Celsius and Fahrenheit.
Procedure for setting the current date and time on the chiller's control panel.
Instructions for customizing the display format for time and date.
Explanation of how to enter the required code to access chiller options.
Steps to enable or set a user entry code for unauthorized adjustments.
Procedure to disable the user entry code feature on the chiller.
Information on operating the chiller in conjunction with external devices.
How to operate the chiller when controlled by an external device.
Operation details when an external flow switch is integrated with the chiller.
Configuration and operation for systems with multiple connected chillers.
Guidelines and procedures for cleaning the chiller's exterior and components.
Specific instructions for cleaning the chiller's condenser unit.
Specific instructions for cleaning the chiller's evaporator unit.
Key parameters and conditions to monitor for optimal chiller performance.
Recommended water chemistry levels for pools and spas to protect the chiller.
Specifications and importance of maintaining correct water flow rates through the chiller.
Procedure for fine-tuning performance by balancing water flow and temperature difference.
Precautions regarding irrigation water and rainwater affecting chiller components.
Required air circulation clearances around the chiller for efficient operation.
Specific minimum clearance requirements for the evaporator section.
Specific minimum clearance requirements for the condenser section.
Recommended schedule and checklist for annual and bi-annual chiller inspections.
Instructions for preparing the chiller for cold weather to prevent freeze damage.
Tips to reduce the time required for cooling pool or cold plunge applications.
How to locate and interpret the chiller's data plate for model information.
Information on optional accessories that can enhance chiller functionality.
List of fault codes and their meanings, indicating specific issues with the chiller.
Guide to diagnosing and resolving common operational problems and error messages.
Troubleshooting steps for when the chiller's display panel shows no information.
Steps to take if the chiller's display panel is unresponsive to user input.
Explanation of the defrost mode indicator and when it is displayed.
Action to take when the chiller displays a firmware error message.
Troubleshooting steps for the 'no water flow' error, checking pump and flow.
Information regarding remote switching modes and their effect on manual operation.
Procedure for re-entering the unit model number if a software error occurs.
Diagnostic steps to determine why the chiller is not starting or operating.
Troubleshooting steps for recurring issues with the chiller's circuit breaker tripping.
Steps to diagnose why the chiller fails to deactivate or shut down properly.
Troubleshooting steps when the chiller operates but does not cool the water.
Explanation of ice formation on the evaporator coil and potential causes.
Reasons why the Pool/Spa button may be disabled, often due to external device configuration.
Determining if water exiting the chiller is normal condensation or a potential leak.
General