Need help?Do you have a question about the Aquacal Leisure Temp LT1000 and is the answer not in the manual?
Details essential safety precautions, warnings, and signals for operating the heat pump.
Highlights critical safety warnings regarding installation, repairs, and water chemistry for user safety.
Details plumbing requirements, diagrams, and connections for the heat pump installation.
Outlines crucial plumbing rules, including union usage, water flow, and filter maintenance.
Specifies minimum and maximum flow rates for each heat pump model.
Procedure for fine-tuning water flow to maintain optimal performance based on temperature difference.
Covers electrical requirements, grounding, surge suppression, and voltage specifications.
Details critical safety precautions and requirements for electrical installation.
Procedure to verify and set the transformer voltage according to site conditions.
Details how to connect various external accessories and controllers to the heat pump.
Procedure for connecting external controllers like Smart Bus or two-wire controllers.
Detailed steps for wiring and configuring smart bus controllers with the heat pump.
Procedure for connecting a gas backup heater to the heat pump.
Guide to connecting and controlling multiple heat pumps in a master/slaved setup.
Covers essential programming steps for the heat pump after installation.
Instructions for resetting the heat pump to its original factory default settings.
Provides guidance on diagnosing and resolving common issues and fault codes.
Lists and explains various fault codes that may appear on the heat pump display.
To Next Page
General