Need help?Do you have a question about the Aquacal HeatWave SuperQuiet SQ166R and is the answer not in the manual?
General| Model | SQ166R |
|---|---|
| Category | Heat Pump |
| Heating Capacity | 166, 000 BTU/hr |
| Voltage | 208-230 V |
| Phase | Single |
| Max Water Temp | 104°F |
| Min Ambient Temp | 40°F |
| Refrigerant | R-410A |
| Compressor Type | Scroll |
| Water Flow Rate | 70 GPM |
Explanation of danger, warning, and notice symbols used throughout the manual.
Instructions for switching between operational modes and turning the unit off.
How to adjust the desired water temperature setpoint using the control panel.
Guide to configuring various programming settings on the heat pump.
Guidelines for maintaining optimal water chemistry levels for heat pump operation.
Specifications for minimum and maximum water flow rates for various heat pump models.
Procedure for fine-tuning water flow to achieve optimal performance based on temperature difference.
Schedule and checklist for annual and bi-annual heat pump inspection and maintenance.
Instructions on how to properly prepare the heat pump for winter to prevent freeze damage.
List and explanation of error codes displayed by the heat pump, with troubleshooting steps.
Common problems encountered with the heat pump and their corresponding solutions.
Troubleshooting steps when the heat pump display panel shows no power.
Steps to diagnose why the heat pump is not operating.
Troubleshooting steps when the heat pump is running but not heating water.
Troubleshooting steps when the heat pump is running but not cooling water.
To Next Page
