Need help?Do you have a question about the Aquacal HeatWave SuperQuiet SQ145 and is the answer not in the manual?
General| Model | SQ145 |
|---|---|
| Category | Heat Pump |
| Heating Capacity | 145, 000 BTU/hr |
| Phase | 1 |
| Compressor Type | Scroll |
| Refrigerant | R410A |
| COP | 5.0 |
| Voltage | 208/230V |
| Power Supply | 60 Hz |
| Operating Temperature Range | 104°F |
Explains DANGER, WARNING, and NOTICE signals used throughout the document for safety.
How to activate Heat, Cool, Auto, or Off modes on the heat pump.
Instructions for adjusting the desired water temperature setpoint.
Configuring Turbo Boost and efficiency modes for variable speed compressors.
Operating multiple heat pumps as master and slaved units.
Recommended annual and bi-annual inspection and maintenance tasks.
Steps for winterizing the heat pump to prevent freeze damage.
Lists and explains various fault codes displayed by the heat pump.
Steps to diagnose why the heat pump is not starting or running.
Diagnoses why the unit runs but does not heat or cool effectively.
Resolving ice on the coil and Pool/Spa button issues.
To Next Page
