Need help?Do you have a question about the Aquacal HeatWave SuperQuiet SQ175 and is the answer not in the manual?
Provides the URL for online service requests.
Provides phone number and operating hours for customer support.
Explains WARNING and CAUTION signal meanings for safe operation.
Lists essential safety measures for installation and use.
Warns about hyperthermia and hypothermia risks.
Steps to power on the heat pump and initial display indications.
Describes the protective display compartment and its access.
Explains how to activate the display lock for security.
Details the information and buttons on the display panel.
Describes the function of each button on the control panel.
Explains the meaning of the various indicator lights on the unit.
Details the information shown on the display screen.
Lists and explains specific codes shown on the display.
Lists default programming options and their ranges.
Instructions for setting Heat, Cool, or Off modes.
How to switch between Celsius and Fahrenheit.
Steps to set the target water temperature for pool/spa.
Procedure to enable the user lock feature with a passcode.
Steps to disable the user lock feature.
How to enter the passcode to unlock the panel.
Guides for using the heat pump with an external controller.
Importance of regularly checking water conditions.
Recommended chemical levels for pools and spas.
Minimum and maximum flow rates for various heat pump models.
Troubleshooting reduced water flow and its effects.
Procedure for optimizing performance by balancing water flow.
Protecting the unit from water damage due to irrigation.
Ensuring adequate space for air circulation and access.
Steps for cleaning the heat pump's outer cabinet.
Detailed steps for washing and cleaning the heat pump cabinet.
Instructions for polishing the heat pump's cabinet panels.
Recommendation for regular inspection and maintenance.
Guidance for protecting the unit during light freezes.
Procedures for winterizing the unit during hard freezes.
Specific steps for winterizing ThermoLink exchangers.
Specific steps for winterizing Tube-in-Tube exchangers.
Explains fault codes and initial troubleshooting steps.
Diagnosing and resolving low/no water flow errors.
Troubleshooting communication and control system errors.
Troubleshooting defrost and water sensor issues.
Diagnosing and resolving HP, HPS, LP, LPS indicator faults.
Resolving over-temperature alarms.
Steps to fix an unresponsive display panel.
Troubleshooting steps when the unit fails to operate.
Identifying causes and solutions for tripping breakers.
Troubleshooting steps for a heat pump that does not turn off.
Diagnosing why the heat pump is running but not heating.
Diagnosing why the heat pump is running but not cooling.
Differentiating normal condensation from potential leaks.
Guidance on finding and understanding the unit's data plate.
Breakdown of model number components and their meanings.
Tips to reduce initial pool heating time.
Tips to reduce initial pool cooling time.
Lists and describes available accessories.
Information on using liquid blankets for heat retention.
Details regarding the remote control kit accessory.
To Next Page
General