Need help?Do you have a question about the Aquacal HeatWave SuperQuiet SQ125 and is the answer not in the manual?
General| Model | SQ125 |
|---|---|
| Category | Heat Pump |
| Heating Capacity | 125, 000 BTU/hr |
| Phase | 1 |
| Hertz | 60 Hz |
| Max Water Temp | 104°F |
| Refrigerant | R410A |
| Compressor Type | Scroll |
| Voltage | 208/230V |
Explains the meaning of DANGER, WARNING, and NOTICE signals used in the manual.
How to activate Heat, Cool, Auto, or Deactivate modes on the heat pump.
Guidelines for maintaining proper water chemistry levels for the heat pump.
Recommended schedule and checklist for annual heat pump inspection.
Diagnosing and resolving various fault codes displayed by the heat pump.
Diagnosing and resolving issues related to air, defrost, and water sensors.
Troubleshooting high/low pressure faults and system lockouts (HP5/LP5).
Resolving issues with communication faults and variable drive compressor problems.
Addressing firmware errors, defrost indicators, and water flow issues.
Resolving common operational problems and indicators.
Troubleshooting blank displays or unresponsive control panels.
Resolving problems like not heating, not cooling, or not shutting off.
Addressing ice formation, button malfunctions, and water leaks.
To Next Page
