EasyManua.ls Logo

aquaforte GPF-2500 - Filter Functions, Use, and Operation; Functions of the Pressure Filter; Use

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
VERSION 1.01 01/2022 PRESSURE FILTER
FUNCTIONS OF THE PRESSURE FILTER
USE
These pressure filters are an ideal and well-functioning filter system for your pond. Advantages over traditional filter systems:
Great cleaning power
Combination of mechanical and biological filtration
Effective filter materials
Integrated UV-C unit and dirt indicator
Max. pump head 3 mtr (depending on the pump)
Installation and maintenance are very easy
The water is cleaned by the pressure filter in 3 stages:
1. Mechanical. Visible dirt particles are removed by 3 layers of filter sponges, sorted from coarse to fine.
2. Biological. Through Filter sponges and bioballs (depending on the model), the development of bio organisms is stimulated.
These micro-organisms remove organic components from the water.
3. UV-C water treatment. Floating algae and germs are killed by the UV-C light. The result is healthy water.
The pressure filter should be placed at least 2 metres away from the pond. The outlet of the water
back into the pond should be max. m2 above the filter lid (0.2 bar water pressure!).
First of all, the pump must be switched on. The UV-C lamp can only be put into operation when
water is flowing past it. Do not use the UV-C unit if the lamp or the connections are damaged and/
or if there are people in the water.
The built-in temperature sensor ensures that the UV-C lamp is automatically switched off in the
event of overheating. As soon as the lamp has cooled down, it is automatically switched on again.
AquaForte pressure filters are supplied complete with all filter materials. Rinse the filter mats carefully before use with pond
water. The bio balls (depending on the model) are placed on the bottom of the filter and the grid with the protective tube
for the UV-C device is placed on top. Place the filter sponges on top, from fine to coarse. Put on the cover and close the filter
Water inlet from pump into lter
Return/outlet to pond
Cleaning outlet of the lter to wastewater or to a ower bed
GPF-2500/GPF-5000/GPF-10000/GPF-15000/GPF-20000/GPF-30000

Related product manuals