Need help?Do you have a question about the Aqualisa AQ150 and is the answer not in the manual?
General| Inlet fitting type | 15mm compression |
|---|---|
| Maximum static pressure | 10 bar |
| Maximum maintained pressure | 5 bar |
| Inlet temperature range - Cold | Min 5°C |
| Inlet temperature range - Hot | Max 65°C |
| Temperature stability | ±1°C |
| Approvals | WRAS |
| Protection Rating | IP44 |
Guidance on safe installation by competent persons and maximum hot water supply temperature limits.
Details on system compatibility, pressure range, and required combination boiler specifications.
Details on maximum operating pressure, recommended PRV settings, and potential pressure fluctuations.
Guidance on suitability for combination boilers, balanced high-pressure, and boosted gravity systems.
Ensuring understanding of instructions, availability of parts, and suitability of fixing accessories.
Flushing the system for debris and pressure testing in accordance with Water Supply Regulations.
Diagnosing and resolving problems with water output being hot, cold, or having poor flow rate.
Troubleshooting causes for irregular temperature changes between hot and cold water.
Identifying and rectifying causes of reduced water flow, such as twisted hoses or debris.
To Next Page
