Aqualisa Optic Q WR.BL.CP.20 User Manual

Register your guarantee instantly.
aqualisa.co.uk/guarantee
0800 408 4243
Remote Control
INSTALLING AND USING YOUR REMOTE CONTROL
WIRELESS RECHARGEABLE
Installing your remote control
Q4957 Part No 704803 Issue 02 Feb 20
* 10m range is dependent on obstacles between the remote and shower controller, building
materials, and the construction of the property. For optimal performance, the controller should be
in direct line of sight with the remote.
Caring for your
remote control
Your remote control should be
cleaned using only a soft cloth
and washing up liquid.
Do not use abrasive cleaners.
The remote control can be used to switch your shower on and o without reaching
into the showering area. It’s wireless, for a simple installation. Once your shower has
been installed, decide where you would like to position the remote control. It can
operate the shower from up to 10 metres away*. Prior to fitting to the wall, ensure
there is a strong and consistent signal. To test; seat the remote in the mounting
bracket, position in the desired location and operate the remote. To fix to the wall,
peel o the backing paper from the mounting bracket and position it in the desired
location. Press it to the wall for 2 to 3 seconds to ensure it is securely fitted.
PROOFING SHEET
Part Description Remote Guide
Part Number 704803
Drawing Number 8579
Job Number Q4957
Revision Number 2
Artwork by Rob Brighton
Signo Paul Pickford
Date 18.2.2020
Need help?
If you need any assistance, you can find some Frequently Asked
Questions at aqualisa.co.uk
Speak to a member of our fully trained Customer Service team on
01959 560010
Alternatively, use Live Chat at aqualisa.co.uk
Registered you
guarantee?
Aqualisa Products Limited declares that the wireless rechargable remote and pairing
controllers, in conjunction with the Aqualisa SmartValve
TM
, complies with the essential
requirements and other relevant provisions of the Low Voltage Directive (2014/35/
EU), the EMC Directive (2014/30/EU) and the RED Directive (2014/53/EU).
Declaration of confirmity

Aqualisa Optic Q WR.BL.CP.20 Specifications

General

Product Type	Remote Control
Model	Optic Q WR.BL.CP.20
Control Type	Wireless
Finish	Chrome
Power Supply	Battery
Temperature Control	Yes
Range	Up to 10 meters
Compatibility	Aqualisa Optic Q showers

Summary

Installing Your Remote Control

Caring For Your Remote Control

Register Your Guarantee

Need Help

Declaration of Conformity

Pairing Your Remote Control

Using Your Remote Control

Switching Shower On

Press the button to turn the shower on. The white LED indicates warming until water is ready.

Selecting Outlet

Press and hold the button to switch between shower outlets on divert models.

Out Of Range

White and red LEDs indicate a weak signal when the button is pressed.

Charging The Battery

Low Battery Warning

A red LED illuminates when the battery is low.