Need help?Do you have a question about the Aqualisa ilux and is the answer not in the manual?
General| Brand | Aqualisa |
|---|---|
| Model | ilux |
| Category | Remote Control |
| Language | English |
Lists all components included for High Pressure/Combi system installations.
Lists all components included for Gravity Pumped system installations.
Essential safety precautions for electrical and water supply installations.
Specific requirements for installing the processor on gravity-fed water systems.
Guidance for standard processors on HP, Combi, and pumped gravity systems.
Key considerations for installing with combination boiler systems.
Pump rating and cistern capacity advice for gravity systems.
Details on push-fit connections, pipe sizing, materials, and flushing procedures.
Correctly orienting and securely mounting the processor and diverter units.
Visual guides for connecting HP/Combi processors to diverter valves.
Visual guides for connecting Gravity Pumped processors to diverter valves.
Fitting isolation valves and preparing pipework for water flow.
Guidance on selecting a safe, accessible, and suitable location for components.
Securing the processor, attaching supply pipes, and connecting the mixed water outlet.
Connecting the diverter valve and preparing pipes for bath outlet/shower hose.
Detaching controller, installing mounting plate, and marking fixing points.
Drilling for wall fixings and data cable entry, securing the mounting plate.
Connecting the data cable and fitting the controller to the mounting plate.
Opening processor and diverter boxes to access connection points.
Connecting the 10m data cable and 2m patch lead within the processor box.
Connecting the processor power lead to a fused spur and earth requirements.
Configuring the processor's operating mode for different water system types.
Restoring electricity and testing the bath operation via the controller.
Adjusting the maximum water temperature output using the control dial.
To Next Page
