NOTESD - IND B – 02/2012 25 / 52
Press the keys to enter the set up menu and scroll up or down to display the settings.
Choose the desired setting by pressing when it appears on the screen.
Production section:
Production can be adjusted depending on the pool’s needs and whether the pool is open or closed by an automatic cover.
The display comes back to or after the set up is chosen. Press to come back
to the main display menu.
Electrolysis section:
This section allows to set up the calibration of the salt and temprature sensor as well as the duration of the reverse polarity
of the cell.
Once the setting is chosen, the screen shows and comes back to Press to
come back to the main display menu.
Once the setting is chosen, the screen shows Press to come back to the main display menu.
Once the setting is chosen, the screen shows press to come back to the main display menu.
Calibration within 24 hours:
This option is useful if the salt is not completely dissolved.
It is necessary to set the the theoretical value obtained after complete dissolution of the salt (3.5 g / l 35kg/m3). If
the real value is not the same after 24 hours, recalibrate immediately with the correct value.
To Next Page
Loading...
