EasyManua.ls Logo

AQUAPHOR RO-101S - User Manual

AQUAPHOR RO-101S
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
AQUAPHOR RO-101S
REVERSE OSMOSIS SYSTEM
OWNER’S MANUAL

Table of Contents

Questions and Answers

  • I
    iscottJul 27, 2025
    Why is the faucet flow rate very slow in my AQUAPHOR RO-101S?
    • D
      Dr. Kathryn BellJul 27, 2025
      A slow faucet flow rate in your AQUAPHOR Water Filtration System can be due to a couple of reasons. First, ensure that the shutoff valve is completely opened. If it isn't, fully open the shutoff valve and faucet. Another potential cause is that one of the replacement cartridges needs replacing. Check each cartridge's resource life and replace any that are depleted. To determine which cartridge needs replacement, consult the instructions.
  • B
    Brian MorganNov 9, 2025
    Why is the AQUAPHOR Water Filtration Systems faucet flow rate very slow?
    • R
      ryantaylorNov 9, 2025
      A slow faucet flow rate in your AQUAPHOR Water Filtration System could be due to several reasons. First, check that the shutoff valve is completely open. If it is, one or more of the replacement cartridges may need replacing. Check each cartridge's lifespan and replace as needed. To determine which cartridge needs replacing, close the shutoff valve, open the faucet to release pressure, replace the cartridges K5, K2, K7M with service caps, open the shutoff valve, open the faucet and flush the water from the unit until the flow rate decreases and the tank is empty. If water continues to run faster than 50 ml/min, install the cartridges one at a time K7?, K2, K5 and according the flow rate decreases determine which of the cartridge (or several cartridges) needs to be replaced. If water runs s...

Summary

Operational Parameters

Operating Conditions Overview

Details operating temperatures, pressure, dimensions, flow rate, and water ratios.

Minimum Pressure by Mineralization

Safety Instructions

General Safety Precautions

Advises on using potable water, hiring specialists, and avoiding unsafe water.

Material and Connection Safety

Warns against copper tubing and connecting to hot water supplies.

Design and Operation Principles

How the RO-101 S System Works

Installation Guide

Installation Location and Stability

Guidance on choosing a suitable installation spot, avoiding heat and ensuring stability.

Connection Node Assembly

JG Tube Connection and Disconnection

Faucet and Drain Setup

Clean Water Faucet Installation

Drain Saddle Installation

Drain Saddle Installation Steps

Starting and Initial Use

Connecting Incoming Tubes

Preparing for Operation

Flushing Procedures

Detailed steps for flushing the membrane and conditioning cartridges.

Cartridge Replacement

Replacing K5 and K2 Cartridges

Guide on how to remove and install the preliminary filter cartridges.

Replacing Conditioning Cartridge K7 M

Replacing Membrane Cartridge

Instructions for removing and installing the main RO membrane cartridge.

Filter Maintenance and Replacement

Recommended Filter Replacement Schedule

Troubleshooting Guide

Common Problems and Solutions

Table listing common issues like slow flow and their corresponding causes and fixes.

Contacting Customer Support

AQUAPHOR RO-101S Specifications

General IconGeneral
BrandAQUAPHOR
ModelRO-101S
CategoryWater Filtration Systems
LanguageEnglish

Related product manuals