AQUAPHOR RO-102S - User Manual

20 pages

Save Page as PDF

To Next Page

AQUAPHOR RO-101S, RO-102S

(in further RO)

REVERSE OSMOSIS SYSTEM

OWNER’S MANUAL

Questions and Answers

C
Cody PhamAug 10, 2025
Why is the faucet flow rate very slow in my AQUAPHOR RO-102S Water Filtration Systems?
- I
  Ian BurgessAug 10, 2025
  A slow faucet flow rate in your AQUAPHOR Water Filtration System can be due to a couple of reasons. First, ensure that the shutoff valve is completely opened. If it isn't, fully open the shutoff valve and faucet. Another potential cause is that one of the replacement cartridges needs replacing. Check each cartridge's resource life and replace any that are depleted. To determine which cartridge needs replacement, consult the instructions.
B
benjamin92Nov 25, 2025
Why is the AQUAPHOR Water Filtration Systems faucet flow rate very slow?
- D
  Dr. Thomas Murphy DVMNov 25, 2025
  A slow faucet flow rate in your AQUAPHOR Water Filtration System could be due to several reasons. First, check that the shutoff valve is completely open. If it is, one or more of the replacement cartridges may need replacing. Check each cartridge's lifespan and replace as needed. To determine which cartridge needs replacing, close the shutoff valve, open the faucet to release pressure, replace the cartridges K5, K2, K7M with service caps, open the shutoff valve, open the faucet and flush the water from the unit until the flow rate decreases and the tank is empty. If water continues to run faster than 50 ml/min, install the cartridges one at a time K7?, K2, K5 and according the flow rate decreases determine which of the cartridge (or several cartridges) needs to be replaced. If water runs s...