AQUAPHOR J. SHMIDT 500

Need help?

Do you have a question about the AQUAPHOR J. SHMIDT 500 and is the answer not in the manual?

Summary

Consumer Features

Stationary Water Purification Quality

APF system enables high-density absorbers for stationary system quality without mains connection.

Portability and Easy Cleaning

APF system offers high-quality drinking water anywhere, no mains connection needed.

High Filtration Speed

APF system provides high-speed filtration through dense absorbers.

Technical Specifications

J.SHMIDT 500 Components

Device Description

Procedure of Beginning of Operation

Prepare Components and Funnel

Unpack, prepare funnel and float, flush parts, install anti-slip pads.

Install Filter Cartridge

Insert the filter cartridge into the funnel, matching notches.

Assemble and Fill Jug

Mount electronics unit, ensure tight fit, fill funnel with water to neck's lower edge.

Start Filtration Process

Press button to start compressor and filtration. Filtration starts if water is present.

Filtration Operation and Limits

Compressor stops when water is purified. Max operation is 4 min.

Prepare New Filter Cartridge

New cartridges require flushing with water equivalent to three funnels before first use.

Filter Subsequent Portions

Pour purified water into another container to avoid overflow when adding new water.

Filter Cartridge Replacement

Remaining Filter Cartridge Life Indication

Operation of the Battery

Charging the Battery

Water Purifier Operating Conditions

Precautionary Measures

Troubleshooting Common Issues

Manufacturers Warranty