What to do if AquaSource 873-W4804 Bathroom Fixtures spout/ showerhead is leaking?
If your AquaSource Bathroom Fixtures spout or showerhead is leaking, it might be due to a damaged cartridge. The solution is to remove the handle and replace the cartridge.
How to fix a leak under the handle of AquaSource 873-W4804?
If there is a leak from under the handle of your AquaSource Bathroom Fixtures, it is likely that the cartridge is damaged. You will need to remove the handle and replace the cartridge.
Why is there an inconsistent water pattern in my AquaSource 873-W4804 Bathroom Fixtures?
An inconsistent water pattern in your AquaSource Bathroom Fixtures usually means the showerhead is dirty or has debris. You should remove the showerhead and check for any debris clogged at the shower connection and the showerhead’s spray nozzle for any buildup.
Guidance on installing the main valve body, connecting water supplies and outlet pipes.
Steps for attaching the shower arm to the valve body through the wall escutcheon.
Steps to test for leaks after initial installation and flush the lines.
Mounting the escutcheon plate and fastening the handle with screws.
Turning the valve stem counterclockwise to set the temperature limit.
Using the ring to control the maximum hot water volume or removing it.
General| Brand | AquaSource |
|---|---|
| Model | 873-W4804 |
| Category | Bathroom Fixtures |
| Language | English |
To Next Page
