Need help?Do you have a question about the Aquatic AQ-AD300.2 and is the answer not in the manual?
Advice on setting gain and frequency to prevent distortion and damage to speakers.
Importance of a good battery and electrical system for amplifier performance and longevity.
Guidelines for safe and effective power and ground connections to the amplifier.
Procedure for disconnecting and connecting battery terminals safely to prevent sparks.
Importance of proper grounding for amplifier performance and avoiding installation issues.
Necessity of installing a master fuse near the battery for system protection.
How to identify and connect speaker wires with correct polarity for optimal performance.
Safe routing and preparation of wires and cables during installation.
Space to record model and serial numbers for warranty purposes.
Definitions of key terms like source unit, main amplifier, and input cables.
Symbols used throughout the manual to identify connection types and features.
Overview of Aquatic AV's Shockwave Technology, highlighting its durability and performance.
Step-by-step instructions for connecting power, ground, and input cables to the amplifier.
How to connect speaker wires to the amplifier's output terminals, maintaining polarity.
Steps for reconnecting the battery, installing the fuse, and performing initial system tests.
Identification and labeling of the amplifier's connectors and control knobs.
Explanation of high-level and low-level input connectors and their usage.
How to properly set the amplifier's gain for optimal sensitivity and performance.
Explanation of the crossover mode switch (Low, High, Full) for frequency filtering.
How to adjust the crossover frequency to filter specific ranges for different speaker types.
Step-by-step guide to setting the amplifier's gain control correctly to avoid distortion.
Procedure for setting the crossover mode and frequency filter for optimal sound.
Table listing common problems, their causes, and recommended solutions.
Wiring diagram for System One configuration, showing connections to amplifier and speakers.
Wiring diagram for System Two configuration, illustrating different power and input connections.
Examples of parallel and series speaker wiring for impedance matching.
Detailed technical specifications including power output, impedance, frequency response, and dimensions.
Information on the warranty period for Aquatic AV products.
Details on what the warranty covers, including purchase requirements and limitations.
Process for repair or replacement of defective products within the warranty period.
List of conditions and damages not covered by the product warranty.
Limitations on implied warranties and liabilities related to product use.
Steps required to obtain service, including obtaining an RMA and return shipping.
To Next Page
General