What to do if my Aquatic Car Receiver shows ERROR?
If your Aquatic Car Receiver shows 'ERROR' due to a mechanism error, press the eject button. If the error persists, it is best to consult your nearest service dealer.
Why does my Aquatic Car Receiver have no power?
If your Aquatic Car Receiver has no power, first ensure the ignition is switched to “ACC” if the power supply is connected to the car accessory terminal. Also, a blown fuse can cause this issue, so try replacing the fuse.
How to fix no sound on Aquatic AQ-IP-3B?
If your Aquatic Car Receiver isn't producing any sound, first, check the volume level and adjust it as needed. Also, ensure that the wiring is properly connected.
Why is my Aquatic Car Receiver radio not working?
If the radio on your Aquatic Car Receiver isn't working or the automatic station selection fails, make sure the antenna cable is firmly inserted. If signals are weak, try selecting a station manually.
What to do if the operation keys on my Aquatic AQ-IP-3B Car Receiver do not work?
If the operation keys on your Aquatic Car Receiver aren't responding, try pressing the RESET button. Also, check if the front panel is properly fixed into its place.
Precautions for checking installation clearances and routing cables away from power wires.
Guidance on supporting the unit's back with the supplied strap for multi-environment use.
Steps for installing the unit into the DIN opening and securing it with brackets.
Visual representation of the unit's wiring connections.
Table detailing pin assignments, wire colors, and their functions.
Step-by-step instructions for connecting an iPod to the built-in docking station.
Step-by-step instructions for safely disconnecting an iPod from the docking station.
Details on turning iPod power on/off and automatic battery charging.
How to switch to iPod mode and view song/artist information on the unit's display.
Methods for navigating and selecting songs, playlists, artists, albums, or genres.
Instructions for using song repeat, repeat all, and shuffle playback functions.
Overview of buttons for system power, mute, volume, tuner band, and tuning.
Functions of buttons related to SAT radio and iPod playback/search.
Diagram showing the placement and numbering of buttons on the optional remote control.
Table mapping remote control buttons to system functions across different modes.
How to open the panel, turn the unit on/off, and use the mute function.
Operation of Sub-woofer, IX-Bass, Mode selection, and Volume adjustment.
Using DC +12V power outputs and top control momentary switches.
Accessing the main menu and navigating through its options.
Detailed settings for Area, Rear Speakers, Beep Tone, and other menu options.
Switching the dual zone feature on or off and its effect on the display.
Choosing audio sources for Front (F-Zone) and Rear (R-Zone) speakers.
How controls operate differently when Dual Zone is active.
Default settings for volume, source, and functional limitations when Dual Zone is ON or OFF.
Setting audio volume, subwoofer level, and low-pass filter for the subwoofer.
Adjusting iX-Bass, Bass level, center frequency, and quality factor.
Adjusting middle tone, treble level, center frequency, quality factor, and speaker balance.
Adjusting the audio balance between front and rear speakers.
How to subscribe to XM Radio and display the unit's identification code.
Methods for tuning stations, using preset bands, storing, and recalling stations.
Viewing XM channel information and using direct tuning or category search methods.
Procedures for entering and exiting the diagnostic mode for XM functionality.
Switching between FM/AM bands and using manual or auto-seek tuning.
Storing stations to presets, automatically storing, and scanning presets.
Explanation of the stereo indicator and automatic mono/stereo switching.
Information on compatible wired and wireless remote controls.
Technical details for auxiliary input, FM, AM, and XM radio sections.
General operating parameters including voltage, fuse, temperature, and mounting angle.
Guide to diagnosing and resolving common problems like no power, no sound, or errors.
General| Model | AQ-IP-3B |
|---|---|
| Brand | Aquatic |
| Channels | 4 |
| Preamp Voltage | 2V |
| Zone Control | 2 Zone |
| Display | 3" Color LCD |
| Bluetooth | Yes |
| USB | Yes |
| AUX | Yes |
| SiriusXM | No |
| Pandora | No |
| Spotify | Yes |
| DAB+ | No |
| Waterproof | Yes |
| Faceplate | Fixed |
To Next Page
