To Next PageTo Next Page
Need help?Do you have a question about the AquaTools AT2407122 and is the answer not in the manual?
Essential safety guidelines for installing and using electrical pool equipment.
Proper application of Teflon tape for sealing pipe threads in pool plumbing.
Recommendations for pipe size, support, slope, and avoiding airlocks.
Instructions for using fittings, unions, and avoiding air traps, with safety warnings.
Critical warnings regarding voltage, shock hazards, grounding, and GFCI protection.
Details on voltage requirements, proper grounding, and circuit breaker sizing.
Step-by-step instructions for filling the pump and piping with water before starting.
Safety precautions and steps before servicing the pump, including stopping the pump and releasing pressure.
Detailed steps for taking apart the pump assembly for maintenance or repair.
Instructions for reassembling the pump, including seal installation and torque specifications.
Procedure for draining the pump and piping to prevent freezing damage.
Steps to reactivate the pump and system after a winter shutdown.
Diagnosing issues related to pump failure, low capacity, or discharge pressure problems.
Troubleshooting recurring trips of the home panel circuit breaker for the pump.
Addressing mechanical troubles, noise, leaks, and pump cavitation.
Form for registering the product warranty with the manufacturer.
General| Voltage | 230V |
|---|---|
| Max Flow Rate | 120 GPM |
| Port Size | 2 inches |
| Frequency | 60 Hz |
| Inlet/Outlet Size | 2 inches |
