Aquavision 10.4” screen

Questions and Answers

K
Kathleen SchmidtAug 12, 2025
How to fix Aquavision 10.4” screen TV remote control that is not working?
- E
  Eric McmahonAug 12, 2025
  If your Aquavision TV remote control isn't working, try these steps: First, replace the batteries. Second, ensure that the infrared transmitter window on the remote isn't exposed to strong light sources, such as fluorescent lamps, as this can interfere with its operation.
Z
Zachary WilliamsAug 16, 2025
What to do if there is picture but no sound on Aquavision 10.4” screen?
- D
  Debbie TorresAug 16, 2025
  If you see a picture on your Aquavision TV but can't hear any sound, check the following: First, review the sound settings to ensure the sound isn't muted. Second, verify that the speakers are properly connected. Finally, if you're using an optional speaker system, make sure its connectors are securely inserted.
M
Melissa TurnerAug 19, 2025
Why is there no picture and sound on my Aquavision TV?
- B
  Betty PinedaAug 19, 2025
  If your Aquavision TV shows no picture and produces no sound, ensure the AC power cord is securely plugged into the AC power outlet. Also, check that the TV is not in standby mode via the remote control.
J
John HallAug 23, 2025
How to fix blurry or moving picture on Aquavision 10.4” screen?
- L
  lyonsjohnAug 23, 2025
  If the picture on your Aquavision TV is not sharp or appears to be moving, it could be due to a weak reception or a poor broadcast signal. Ensure the antenna is correctly oriented. Also, check that the outside antenna is properly connected.
C
connorjacksonAug 27, 2025
Why is my Aquavision TV picture too dark?
- S
  sherryhigginsAug 27, 2025
  If the picture on your Aquavision TV is too dark, the lamp may have malfunctioned. Check the BRIGHTNESS setting and make sure it is not set too low.
N
Nancy SmithAug 30, 2025
What causes a doubled or tripled picture on Aquavision 10.4” screen, and how can I fix it?
- J
  johnwilliamsonAug 30, 2025
  A doubled or tripled picture on your Aquavision TV may be due to reflected electric waves from mountains or buildings. To resolve this, make sure the antenna is facing the right direction.
N
nthompsonSep 3, 2025
Why is the picture spotted on my Aquavision TV?
- P
  Pam BryantSep 3, 2025
  If the picture on your Aquavision TV is spotted, it may be due to interference from cars, trains, high voltage lines, or neon lights. It could also be interference between the antenna cable and power cable. Try positioning them further apart.
H
Haley JamesSep 7, 2025
What to do if there are stripes on the screen or colours fade on Aquavision 10.4” screen?
- K
  Kimberly BradySep 7, 2025
  If there are stripes on the screen or the colors fade on your Aquavision TV, the unit may be receiving interference from other devices. Use the unit as far apart as possible from devices that may cause possible interference.