Aqueon Betta Falls User Manual

• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Make sure surface is level
1. place aquarium on Strong, Stable Surface
• Carefully pour rinsed gravel
into middle of each aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" from the bottom.
Betta
Falls
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Make sure surface is level
1. place aquarium on Strong, Stable Surface
• Carefully pour rinsed gravel
into middle of each aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" from the bottom.
Betta
Falls
See reverse for additional information.
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Make sure surface is level
1. place aquarium on Strong, Stable Surface
Betta
Falls
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Make sure surface is level
1. place aquarium on Strong, Stable Surface
Fill to “Max” level on indicator
• Slowly pour room-temperature water into
lter chamber until it lls completely without
overowing in the aquarium chamber.
• Once water in lter chamber has emptied,
check “Max” level indicator to see if more
water should be added. If so, repeat step
above until water level reaches “Max”.
4. add Water to Filter Chamber
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Make sure surface is level
1. place aquarium on Strong, Stable Surface
Fill to “Max” level on indicator
• Slowly pour room-temperature water into
lter chamber until it lls completely without
overowing in the aquarium chamber.
• Once water in lter chamber has emptied,
check “Max” level indicator to see if more
water should be added. If so, repeat step
above until water level reaches “Max”.
4. add Water to Filter Chamber

Aqueon Betta Falls Specifications

General

Brand	Aqueon
Model	Betta Falls
Category	Aquariums
Language	English

Summary

Aquarium Setup Guide Overview

Key Success Tips

Essential advice on lighting duration, fish feeding amounts, and water change frequency for a healthy aquarium.

Electrical Safety Drip Loop

Explains the 'drip loop' method to prevent water from reaching electrical outlets, ensuring user safety.

Aquarium Placement and Stability

Adding Gravel to Aquarium

Adding Plants and Décor

Adding Water to Filter Chamber

Adding Water to Aquarium Chambers

Installing Filter Cartridge

Adding Covers and Turning Power On

Introducing Fish to Aquarium