Aquila T2 User Manual

T2 Taximeter User Guide. © Aquila Electronics Limited
This manual describes the operation of the T2 Taximeter once correctly
installed and configured by an authorised Aquila Taximeter Dealer. Aquila
Electronics Limited reserve the right to change the specification of its
products without notice. If any further information is required, please
contact your local dealer.
N00522 Issue 1. March 2017
T2 Taximeter
User Guide

Aquila T2 Specifications

General

Brand	Aquila
Model	T2
Category	Measuring Instruments
Language	English

Summary

1 T2 Taximeter Basics

Basic Operation Overview

Overview of the T2 taximeter's display, buttons, and fundamental operational steps.

2 Operating Modes Explained

Standby Mode Functionality

Meter state when powered on but not active, showing basic display information.

FOR HIRE Mode Usage

Meter ready for fare calculation, displays rate and allows manual rate selection.

HIRED Mode Calculation

Meter actively calculates fare based on time and distance.

STOPPED Mode Operation

Fare calculation paused; continues distance-based calculation after journey.

3 Tariffs, Options, and PINs

Tariff Programming and Codes

How tariffs are programmed, including calendar controls and configuration options.

Receipt Programs and PIN Entry

Optional receipt printing and Personal Identification Number management.

4 The User Menus

Totals and Totals Setup

Access, manage, and configure meter totals, sets, items, and options.

Info Menu Items Overview

View meter information like Serial Number, Tariff Number, Software Version, and Calibration.

Features and Settings Control

Control functions like Beep, Speed Alarms, Time, Date, and Date Stop.

Print Out Functionality

Print receipts on an optional printer if a receipt program is installed.

5 T2 Power Up Test

6 Battery and Clock Maintenance

Battery Re-charging Guide

Procedure for recharging the internal battery.

Clock and Date Setting Procedure

How to set the meter's internal clock and date after power loss.